These are the guys who invented the internet.
Description
Request for Information
Routing Protocols and Management (RPM) for High Capacity Networks– Request for Information Word Version 01 – Posted on Jun 22, 2007
General Information
Document Type: Special Notice
Solicitation Number: Reference-Number-SN07-39
Posted Date:
Original Response Date: 06 August 2007
Current Response Date:
Original Archive Date:
Current Archive Date:
Classification Code: A — Research & Development
Naics Code: 541710 — Research and Development in the Physical, Engineering, and Life SciencesContracting Office Address
Other Defense Agencies, Defense Advanced Research Projects Agency, Contracts Management Office, 3701 North Fairfax Drive, Arlington, VA, 22203-1714, United States
Description
REQUEST FOR INFORMATION – Routing Protocols and Management (RPM) for High Capacity Networks
Defense Advanced Research Projects Agency’s (DARPA) Strategic Technology Office (STO) is requesting information on revolutionary ideas and approaches to map administrative, business, and war fighting mission requirements to the supporting networks and information systems. The requested information is sought to determine if industry has ideas that warrant specific project-oriented investment by DARPA in this area. No funding has currently been allocated to this effort. A Broad Agency Announcement (BAA) and/or other solicitation may or may not result from the findings of this Request for Information (RFI).
Introduction
Modern communications networks were designed and developed when memory and processing power were limiting factors rather than plentiful and generally ubiquitous throughout the network. Today’s environment finds memory and processing power available even at the tactical edge of the Global Information Grid (GIG). Routing Protocols and Management (RPM) for High Capacity Networks is considering methods to re-think and potentially redesign some of the basic concepts that have shaped today’s Internet technology. The goal of any DARPA program in this area is to improve transfer speeds, network routing efficiency, reliability, simplify network configuration, and reduce cost.
Problem Definition
Modern communications networks were designed and developed when memory and processing power were limiting factors rather than plentiful and generally ubiquitous throughout the network. Today’s environment finds memory and processing power available even at the tactical edge of the Global Information Grid (GIG). Routing Protocols and Management (RPM) for High Capacity Networks is considering methods to re-think and potentially redesign some of the basic concepts that have shaped today’s Internet technology. The goal of any DARPA program in this area is to improve transfer speeds, network routing efficiency, reliability, simplify network configuration, and reduce cost.
Problem Definition
DARPA is interested in ideas that will lead to the development of new addressing schemes (e.g., a structured hierarchical addressing system) to supplement the current IP scheme. New addressing schemes should make the network faster, cheaper, or easier to administer. Additionally, we hope to implement a prioritization system to allow higher priority traffic faster service through the network, along with the authentication system such a system requires.
This RFI seeks ways to enhance network prioritization and authentication for priority users; create multipath route discovery and distribution; lower manpower requirements for network configuration; and efficiently connect Dense Wave Division Multiplex (DWDM) networks and conventional IP networks. The program assumes the existence of DWDM switched networks and seeks to make the connection between a normal IP network and a DWDM switched network as simple and efficient as possible.
The long-term goal is to develop new systems that use network capacity as efficiently and inexpensively as possible. Ideas that require modifications to addressing schemes (e.g., modifying IP), changes to the Domain Name Server (DNS), or other established Internet Standards are acceptable as long as these changes can be justified.
DARPA is interested in responses describing the solution with low granularity, at the device or process level, rather than at the macro or enterprise level. DARPA is interested in autonomic or semi-autonomic systems that require little manual intervention. Finally, simplicity and ability to transition a solution are of interest – large theoretical systems that require extensive training to operate would be of little value as a potential program.
DARPA is not interested in evolutionary improvements to existing fielded or commercial systems, nor funding requests or investment opportunities to bring existing work into production. This RFI seeks potential high-risk, high payoff research opportunities related to Routing Protocols and Management for High Capacity Networks that may provide revolutionary capabilities for the Department of Defense.
Request for Information Focus Areas
In an effort to shape future work on Routing Protocols and Management for High Capacity Networks, DARPA/STO is soliciting position papers addressing the following areas:
1. Concepts and ideas for novel methods to allow multipath route discovery and multipath route distribution; improve network routing efficiency and reliability; simplify network configuration and management; provide for different levels of priority and precedence; and improve authentication/attribution.2. Technical methods to efficiently and inexpensively interconnect DWDM networks and conventional IP networks. These can be linked to, a part of, or separate from a submission for #1 above.
3. The impact of your proposed idea(s) on the personnel needed to operate networks
4. Potential metrics to measure the effectiveness of what you proposeWorkshop
DARPA will hold a workshop for selected RFI respondents in the vicinity of Arlington, VA in October 07. The workshop may include an overview of previous DARPA programs, historical assumptions, today’s requirements and challenges, invited presentations, submitter presentations, discussions, and Q&A. Respondents interested in attending should visit the registration website at https://www.enstg.com/Signup/default.cfm?ThisCode=NEX74474
INSTRUCTIONS TO RESPONDERS
This announcement contains all information required to submit a position paper. No additional forms, kits or other materials are needed.DARPA appreciates responses from all capable and qualified sources including but not limited to universities, university affiliated research centers, federally-funded research centers, private or public companies and Government research laboratories.
Position papers have the following formatting requirements:
a) A one page cover sheet that identifies the title, organization(s), responder’s technical and administrative points of contact – including names, addresses, phone and fax numbers, and email addresses of all co-authors;
b) An executive summary with a one page limit summarizing the key ideas;
c) A single overview briefing chart graphically depicting the key ideas;
d) A technical response to one or more of the 4 RFI Focused Areas posed above in question/answer format, with a 10 page limit in 10 point font;
e) An optional list of citations including URLs if available;
f) An optional briefing if the submitter wishes to be considered to present at the workshop;
g) The above should be submitted as MS Word, PDF, and/or MS PowerPoint documents.Respondents are encouraged to be as succinct as possible while at the same time providing actionable insight.
Respondents must submit one original and one paper copy of the full response and one electronic copy of the full RFI response (in Microsoft Word, Adobe PDF, and/or Microsoft PowerPoint on a single CD ROM). Disks must be clearly labeled with RFI SN07-39 the offering organization, and points of contact. The full RFI response (original and designated number of hard and electronic copies) must be submitted to: DARPA/STO, Attn: Dr. Timothy Gibson, 3701 N. Fairfax Drive, Arlington, VA 22203-1714. Responses to this Request for Information (RFI) are due no later than 2:00pm, Local Time, Arlington, VA, on 06 August 2007. ANY INQUIRIES ON THIS REQUEST FOR INFORMATION AND/OR WORKSHOP MUST BE SUBMITTED TO RPM07-39@darpa.mil. NO TELEPHONIC INQUIRIES WILL BE ACCEPTED.
DARPA will host a web site in support of RFI SN07-39, Routing Protocols and Management (RPM). The web site will contain information supplementary to this document such as Question & Answer lists in the event that clarifications are needed. The URL for the web site is http://www.darpa.mil/sto/solicitations/RPM/index.html. In the event of any discrepancies between material published on this web site and FedBizOps, FedBizOps takes precedence.
DISCLAIMERS AND IMPORTANT NOTES
This is a Request for Information issued solely for information and new program planning purposes and does not constitute a solicitation. No proprietary or classified information should be submitted. Respondents are advised that DARPA is under no obligation to acknowledge receipt of the information received, or provide feedback to respondents with respect to any information submitted under this RFI. It is the respondent’s responsibility to ensure the material has been approved for public release by the organization that funded the research.
In accordance with FAR 15.201(e) responses to this notice are not offers and cannot be accepted glby the Government to form a binding contract. Responders are solely responsible for all expenses associated with responding to this RFI.
Submissions may be reviewed by: the Government (DARPA and partners including but not limited to AFRL and OSD-NII); Federally Funded R&D Centers (such as MITRE and Massachusetts Institute of Technology/Lincoln Laboratories); and Systems Engineering and Technical Assistance (SETA) contractors (Booz Allen Hamilton and SRS Technologies).
Point of Contact
Timothy Gibson, Ph.D., Program Manager, Email timothy.gibson (at) darpa.mil
Point of Contact
Timothy Gibson, DARPA Program Manager, Phone 000-000-0000, Fax null, Email Timothy.Gibson@darpa.mil